Tuesday, November 19, 2013

Nokia C2 03 Keypad Light LED Problem Solution

Nokia C2-03 Keypad Light LED Problem Solution

In this solution we show you the Nokia C2-03 keypad LED light components which is useful to fix when the  keypad LED failed to work. There are two white LED light used in in illuminating the keypads, it may also get damaged due by water, wet or cause by oxidation build ups.

The solution below shows the connection line paths of the two white LEDs which is more convenient in tracing broken spots. It also shows which nearby particular components it is being connected or part of the keypad back lighting circuit.

Heres the some hints that may preferably help fix in troubleshooting Nokia C2-03 keypad back light failure. 

1. Check the whole area and surrounding components for the keypad white LED for possible damaged, cracks, oxidation etc. Clean it first if necessary.
2. Check both of the two LEDs using a multimeter. Replaced if already damaged.
3. If the LEDs light are still working check the (VBAT 3.7V) battery voltage line paths.

Nokia c2-03 keypad light jumper ways
Nokia C2-03,C2-06,C2-08 Keypad light problem Solution
4. Check each of the LEDs positive and negative connections.
5. Check the  connected resistors and coils, re-solder or replace if damaged
6. Check the LED driver transistors. Re-work or replace if necessary.
View larger picture here.

This solution may also works on Nokia C2-06 and Nokia C2-08 since they both similar PCB board layout with Nokia C2-03 a Dual SIM card built in capability and a slider phone.
-->

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.